Crossguide Couplers
- 2.6 - 18 GHz High Performance
- 1.15 Typical VSWR
- Male or Female Connectors
- Mid-Band Nominal Coupling Values of 20-50 are standard.
- Standard Material Copper or Aluminum (6061)
AMC offers a top of the line crossguide coupler that is used to sample the power traveling through a system. All AMC components are produced with the highest quality available. We insure our quality with an ISO9001 / AS9100 Quality System. Note all AMC-CGC models are made of copper or aluminum and include iridite/corrosion protection treatment. We offer a flat black paint that is our standard with all our units.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE GROOVED (ALL CLEAR HOLES) |
D = CPR STYLE GROOVED (ALL TAP HOLES) |
E = CPR STYLE FLAT (ALL TAP HOLES) |
F = CPR STYLE FLAT (CLEAR HOLES) |
G = CPR STYLE CONTACT (CLEAR HOLES) |
H = CPR STYLE CONTACT (ALL TAP HOLES) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT/ TAP,/CLEAR HOLES) |
K = CMR (ALL TAP HOLES) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP HOLES) |
N = UG COVER GROOVED (ALL CLEAR HOLES) |
O = UG CHOKE (CLEAR HOLES) |
P = UG CHOKE (ALL TAP HOLES) |
Q = UG COVER GROOVED (ALL TAP HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY) |
| NO. | W/G SIZE |
FLG P1 + P2 |
CONN. P3 |
CPLG VALUE dB |
MATERIAL A = Alum B = Brass |
|---|---|---|---|---|---|
| AMC CGC | 75 | P/L | N | 40 | B |
SAMPLE P/N:
AMC-CGC75P/LN40B
The above part number describes the following: WR 75 crossguide coupler, with CHOKE FLANGE/COVER FLANGE on primary arm and a type “N” coax connection. The connector is on the secondary axis arm. The coupling value is 40dB. The last letter 'B' reflects the material Brass, the other option is 'A' for Aluminum.
 |
|||||
| WR SIZE | FREQ: GHZ | DIM. A | DIM. B | DIM. C | |
|---|---|---|---|---|---|
| 62 | 12.4 - 18.0 | 3.5 | 1.75 | 2.37 | |
| 75 | 10.0 - 15.0 | 3.75 | 1.87 | 2.5 | |
| 90 | 8.20 - 12.4 | 4 | 2 | 2.75 | |
| 112 | 7.05 - 10.0 | 4.2 | 2.1 | 3 | |
| 137 | 5.85 - 8.20 | 6 | 2.47 | 4 | |
| 159 | 4.90 - 7.05 | 4 | 3 | 4 | |
| 187 | 3.95 - 5.85 | 6.5 | 3.25 | 4.5 | |
| 229 | 3.30 - 4.90 | 7 | 3.5 | 4.75 | |
| 284 | 2.60 - 3.95 | 7.5 | 3.75 | 5 | |
| 430 | 1.7 - 2.6 | 9 | 6.13 | 9.25 | |
Specify operating frequency. |
|||||
Directivity > 20dB |
|||||
Return Loss (Main Arm) > 26dB. |
|||||
Return Loss (2nd Arms) > 19dB. |
|||||
Specify coupling direction (forward or reverse) |
|||||
Specify if pressurization is required. |
|||||
AMC P-3+P-4 Type Codes: |
||||
|---|---|---|---|---|
N = Type N Coax. Conn. - Female. |
||||
NM = Type N Coax, Conn. - Male |
||||
S = Type SMA Coax. Cones- Female |
||||
SM = Type SMA Coax. Cony - Male |
||||
Note: Type N and S are standard |
Note: All AMC-CGC models are made of brass or Aluminum and include an iridite/ corrosion protection treatment. Flanges are unplated, iridited and polished. Finish is flat black. For other plating finishes, materials, or paint color requirements, please specify
