Double Ridge Waveguide - Formed Bends
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
Advanced Microwave Components is proud to offer formed double ridge bends in a flash! Our waveguide sections are manufactured to our customer's specifications. All AMC components are produced with the highest quality available. We insure our quality through a three-point inspection system. All parts are painted flat black and flanges are polished, unplated and iridited.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE CONTACT (CLEAR HOLES) |
D = CPR STYLE CONTACT (ALL TAP) |
E = CPR STYLE FLAT (CLEAR HOLES) |
F = CPR STYLE FLAT (ALL TAP) |
G = CPR STYLE GROOVED (CLEAR HOLES) |
H = CPR STLYE GROOVED (ALL TAP) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT TAP, CLEAR) |
K = CMR (ALL TAP) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP) |
N = UG COVER GROOVE (CLEAR HOLES) |
O = UG COVER GROOVE (ALL TAP) |
P = UG CHOKE (ALL TAP) |
Q = UG CHOKE (CLEAR HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY |
MOUNTING HOLES |
|---|
- 1 =ALT. TAP & CLEAR |
- 2 =ALL TAPPED |
- 3 = ALL CLEAR |
|
|||
| WR SIZE | FREQ: GHZ | MIN. DIM. "E-BEND" | MIN. DIM. "H-BEND" |
|---|---|---|---|
| 200 | 2.00 - 4.80 | 7 | 7.5 |
| 350 | 3.50 - 8.20 | 5 | 6 |
| 475 | 4.75 - 11.0 | 3.5 | 4 |
| 580 | 5.80 - 16.0 | 1.75 | 2 |
| 650 | 6.50 - 18.0 | 2 | 2.5 |
| 750 | 7.50 - 18.0 | 2 | 2.5 |
| 110 | 11.0 - 26.5 | 2 | 2.5 |
| 180 | 18.0 - 40.0 | 1.5 | 2.5 |
SAMPLE P/N:
AMC-DREB-580-C1/C1-2.0X2.0-A
| NO: | W/G SIZE | FLNG a+b |
LEG DIM A+B | MRTL BRASS/ ALUM. |
|---|---|---|---|---|
| AMC DREB | 580 | -C1/C1- | -2.0x2.0- | A |
The above referenced part number describes the following item: WRD580 "E" formed bend, with cover flanges, legs = 2.0" each, made of aluminum. All bends are 90 degree, other degrees available upon request. Note: All AMC models include an iridite/corrosion protection treatment and are painted flat black. Flanges are unplated, iridited and polished. For other finishes, material, or paint color requirements, please specify.
