Double Ridge Medium Power Load
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
Advanced Microwave Components is proud to offer quality waveguide terminations in a flash! Our waveguide sections are manufactured to our customer's specifications. All AMC components are produced with the highest quality available. We insure our quality through a three-point inspection system. All parts are painted high heat flat black and flanges are polished, unplated and iridited.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE CONTACT (CLEAR HOLES) |
D = CPR STYLE CONTACT (ALL TAP) |
E = CPR STYLE FLAT (CLEAR HOLES) |
F = CPR STYLE FLAT (ALL TAP) |
G = CPR STYLE GROOVED (CLEAR HOLES) |
H = CPR STLYE GROOVED (ALL TAP) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT TAP, CLEAR) |
K = CMR (ALL TAP) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP) |
N = UG COVER GROOVE (CLEAR HOLES) |
O = UG COVER GROOVE (ALL TAP) |
P = UG CHOKE (ALL TAP) |
Q = UG CHOKE (CLEAR HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY |
MOUNTING HOLES: |
|---|
- 1 = ALT. TAP & CLEAR |
- 2 = ALL TAPPED |
- 3 = ALL CLEAR |
|
||||
| WRDSIZE | FREQ: GHZ | LENGTH MAX. | MAX .VSWR | MAX. (CW) POWER |
|---|---|---|---|---|
| 350 | 3.50 - 8.20 | 13 | 1.1 | 350 |
| 475 | 4.75 - 11.0 | 12 | 1.1 | 200 |
| 580 | 5.80 - 18.0 | 9 | 1.1 | 150 |
| 650 | 6.50 - 18.0 | 9 | 1.1 | 125 |
| 750 | 7.50 - 18.0 | 9 | 1.1 | 125 |
| 110 | 11.0 - 26.5 | 7 | 1.1 | 75 |
| 180 | 18.0 - 40.0 | 4.5 | 1.1 | 50 |
SAMPLE P/N: AMC-DRMPT-580-C1-A
| MODEL N0: |
W/G SIZE |
FLANGE TYPE |
MATERIAL Brass Alumn |
|---|---|---|---|
| AMC DRMPT | 580 | -C1- | A |
The above referenced part number describes the following item: WRD580 Medium Power Termination, a cover flange with alternate tap & clear holes, made of aluminum.
Note: All AMC models include an iridite/corrosion protection treatment and are painted high-temperature flat black. Flanges are unplated, polished and iridited. Other finishes
