Double Ridge Twists
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
Advanced Microwave Components is proud to offer quality waveguide terminations in a flash! Our waveguide sections are manufactured to our customer's specifications and can be ready to ship on the same day. All AMC components are produced with the highest quality available. We insure our quality through a three-point inspection system. All parts are painted high heat flat black and flanges are polished, unplated and iridited.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE CONTACT (CLEAR HOLES) |
D = CPR STYLE CONTACT (ALL TAP) |
E = CPR STYLE FLAT (CLEAR HOLES) |
F = CPR STYLE FLAT (ALL TAP) |
G = CPR STYLE GROOVED (CLEAR HOLES) |
H = CPR STLYE GROOVED (ALL TAP) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT TAP, CLEAR) |
K = CMR (ALL TAP) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP) |
N = UG COVER GROOVE (CLEAR HOLES) |
O = UG COVER GROOVE (ALL TAP) |
P = UG CHOKE (ALL TAP) |
Q = UG CHOKE (CLEAR HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY |
MOUNTING HOLES |
|---|
- 1 =ALT. TAP & CLEAR |
- 2 =ALL TAPPED |
- 3 = ALL CLEAR |
|
|||
| WRD SIZE | FREQ: GHZ | VSWR MAX. | MIN .LENGTH DIM. "L" | 200 | 2.00 - 4.80 | 1.15 | 11 |
|---|---|---|---|
| 350 | 3.50 - 8.20 | 1.15 | 9 |
| 475 | 4.75 - 11.0 | 1.15 | 7 |
| 580 | 5.80 - 16.0 | 1.15 | 5 |
| 650 | 6.50 - 18.0 | 1.15 | 5 |
| 750 | 7.50 - 18.0 | 1.15 | 5 |
| 110 | 11.0 - 26.5 | 1.15 | 4 |
| 180 | 18.0 - 40.0 | 1.15 | 3.5 |
SAMPLE P/N: AMC-DRTW580-C1/C1-10-A
| MODEL N0: |
W/G SIZE |
FLANGE TYPE |
MATERIAL Brass/Alumn. |
|---|---|---|---|
| AMC DRTW | 580 | -C1/C1- | B |
The above referenced part number describes the following item: WRD580 90 degree twist section assembly, both flanges are cover flanges with alt. tapped & clear holes, made of aluminum material. The overall length is 10 inches from flange face to flange face.
Note: All AMC models include an iridite/corrosion protection treatment and are painted flat black. Flanges are unplated, polished, and iridited. AMC makes twists of all angles. Please specify your required degree if other than 90.
