High Power Load
- 1.70 - 26.50 GHz High Performance
- 1.15 Typical VSWR
- Standard Material Aluminum (6061)
- 200-4000 Watt Loads
AMC offers a High Power Termination that has a quality load that is installed with a high heat epoxy. The termination comes standard with several cooling fins attached to the external surface. AMC also offers special unit design upon customer request. All AMC components are produced with the highest quality available. We insure our quality with an ISO9001 / AS9100 Quality System. All AMC's High Power Terminations come standard with high heat black paint. We offer additional upgrades on paint.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE GROOVED (ALL CLEAR HOLES) |
D = CPR STYLE GROOVED (ALL TAP HOLES) |
E = CPR STYLE FLAT (ALL TAP HOLES) |
F = CPR STYLE FLAT (CLEAR HOLES) |
G = CPR STYLE CONTACT (CLEAR HOLES) |
H = CPR STYLE CONTACT (ALL TAP HOLES) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT/ TAP,/CLEAR HOLES) |
K = CMR (ALL TAP HOLES) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP HOLES) |
N = UG COVER GROOVED (ALL CLEAR HOLES) |
O = UG CHOKE (CLEAR HOLES) |
P = UG CHOKE (ALL TAP HOLES) |
Q = UG COVER GROOVED (ALL TAP HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY) |
|
|||||
| EIA WR SIZE |
FREQ: RANGE GHZ |
MAX. DIM. " L " |
MAX. DIM. " A " |
MAX. DIM. " B " |
POWER WATTS (CW) |
|---|---|---|---|---|---|
| 42 | 18.0 - 26.5 | 4 | 2.25 | 2.25 | 200 |
| 62 | 12.4 - 18.0 | 4.5 | 2.5 | 2.5 | 350 |
| 75 | 10.0 - 15.0 | 9.25 | 2.75 | 3 | 750 |
| 90 | 8.20 - 12.4 | 5.75 | 2.75 | 2.75 | 375 |
| 112 | 7.05 - 10.0 | 6.25 | 3.25 | 3.25 | 425 |
| 137 | 5.85 - 8.20 | 8.25 | 425 | 4.25 | 1000 |
| 137 | 5.85 - 8.20 | 13.1 | 4 | 3.5 | 5000 |
| 159 | 4.90 - 7.05 | 8.5 | 3.75 | 3.25 | 1000 |
| 187 | 3.95 - 5.85 | 9.5 | 4.25 | 3.75 | 1250 |
| 229 | 3.30 - 4.90 | 12 | 5.5 | 5 | 2000 |
| 284 | 2.60 - 3.95 | 13.5 | 6 | 5 | 3500 |
| 430 | 1.70 - 2.60 | 17 | 8.5 | 7 | 4000 |
SAMPLE P/N: AMC-HPT-137-G-A
| MODEL N0: |
W/G SIZE |
FLANGE TYPE | MATERIAL B=Brass |
|---|---|---|---|
| AMC HPT | 137 | -G- | A |
The above referenced part number describes the following item: WR137 High Power Termination, with a cprg flange, made of aluminum.
Note: All AMC models include an iridite/corrosion protection treatment and are painted high-temperature flat black. Flanges are unplated, polished and iridited. Other finishes are available upon request.
