Low Power Load
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
AMC offers a Low Power Termination that has a quality load that is installed with a high heat epoxy. AMC also offers special unit design upon customer request. All AMC components are produced withthe highest quality available. We insure our quality through a three-point inspection system. All AMCLow Power Terminations come standard with flat black paint.
| AMC FLANGE CODES: |
|---|
CO = UG COVER STYLE |
CH = UG CHOKE STYLE |
CG = COVER WITH O-RING GROOVE |
G = CPR STYLE WITH GROOVE |
F = CPR STYLE NO GROOVE |
O = OTHER (specify) |
SAMPLE P/N: AMC-LPT-75-CG-B
| MODEL N0: |
W/G SIZE |
FLANGE TYPE |
MATERIAL Brass/Alumn. |
|---|---|---|---|
| AMC LPT | 75 | -CG- | B |
The above referenced part number describes the following: WR75 Low Power Termination. The flange is a UG cover style with a groove, made of brass.
Note: All AMC models include an iridite/corrosion protection treatment and are painted high-temperature flat black. Flanges are unplated, polished and iridited. Other finishes and paint colors are available upon request.
|
||||
| EIA WR SIZE | FREQ: RANGE GHZ | LNGTH MAX | MAX VSWR | WATTS (CW) |
|---|---|---|---|---|
| 28 | 26.5 - 40.0 | 3.5 | 1.1 | 20 |
| 42 | 18.0 - 26.5 | 2.5 | 1.1 | 20 |
| 62 | 12.4 - 18.0 | 1 | 1.1 | 20 |
| 75 | 10.0 - 15.0 | 1.25 | 1.1 | 25 |
| 90 | 8.20 - 12.4 | 1.25 | 1.1 | 35 |
| 112 | 7.05 - 10.0 | 1.25 | 1.1 | 45 |
| 137 | 5.85 - 8.20 | 1.25 | 1.1 | 50 |
| 159 | 4.90 - 7.05 | 1.5 | 1.1 | 80 |
| 187 | 3.95 - 5.85 | 2.5 | 1.1 | 90 |
| 229 | 3.30 - 4.90 | 2.5 | 1.1 | 100 |
| 284 | 2.60 - 3.95 | 3 | 1.1 | 125 |
| 430 | 1.70 - 2.60 | 8 | 1.1 | 175 |
