Low VSWR Load
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
AMC offers a Low Power Termination that has a quality load that is installed with a high heat epoxy. AMC also offers special unit design upon customer request. All AMC components are produced withthe highest quality available. We insure our quality through a three-point inspection system. All AMCLow Power Terminations come standard with flat black paint.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE CONTACT (CLEAR HOLES) |
D = CPR STYLE CONTACT (ALL TAP) |
E = CPR STYLE FLAT (CLEAR HOLES) |
F = CPR STYLE FLAT (ALL TAP) |
G = CPR STYLE GROOVED (CLEAR HOLES) |
H = CPR STLYE GROOVED (ALL TAP) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT TAP, CLEAR) |
K = CMR (ALL TAP) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP) |
N = UG COVER GROOVE (CLEAR HOLES) |
O = UG COVER GROOVE (ALL TAP) |
P = UG CHOKE (ALL TAP) |
Q = UG CHOKE (CLEAR HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY |
|
||||
| EIA WR SIZE |
FREQ: RANGE GHZ |
LENGTH MAX. |
MAX. VSWR |
POWER WATTS (CW) |
|---|---|---|---|---|
| 28 | 26.5 - 40.0 | 2.5 | 1.02 | 25 |
| 42 | 18.0 - 26.5 | 3 | 1.02 | 50 |
| 51 | 15.0 - 22.0 | 3 | 1.02 | 50 |
| 62 | 12.4 - 18.0 | 4 | 1.02 | 1.5 |
| 75 | 10.0 - 15.0 | 4.5 | 1.02 | 2 |
| 90 | 8.20 - 12.4 | 5.5 | 1.02 | 3 |
| 112 | 7.05 - 10.0 | 5.5 | 1.02 | 4 |
| 137 | 5.85 - 8.20 | 5.5 | 1.02 | 6 |
| 159 | 4.90 - 7.05 | 6 | 1.02 | 7 |
| 187 | 3.95 - 5.85 | 6.5 | 1.02 | 8 |
| 229 | 3.30 - 4.90 | 7.5 | 1.02 | 10 |
| 284 | 2.60 - 3.95 | 10.5 | 1.02 | 10 |
| 430 | 1.70-2.60 | 14 | 1.02 | 15 |
SAMPLE P/N: AMC-LPLVT-75-CO-A
| MODEL N0: |
W/G SIZE |
FLANGE TYPE |
MATERIAL Brass/Alumn. |
|---|---|---|---|
| AMC LPLVT | 75 | -CO- | A |
The above referenced part number describes the following: WR75 Low Power, Low VSWR Termination, with a cover flange, made of aluminum.
Note: All AMC models include an iridite/corrosion protection treatment and are painted hi-temperature flat black. Flanges are unplated, polished and iridited. Other finishes, please specify.
