Waveguide Pressure Inlet
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
Advanced Microwave Components offers an array of waveguide to coaxial adapters. The waveguide sizes range from WR-62 to as large as WR-430. AMC also uses SMA and K type male and female connectors for their interface connections. AMC offers special unit design upon customer request. All AMC components are produced with the highest quality available. We insure our quality through a three-point inspection system. All AMC Adapters are painted flat black, but we offer additional upgrades on paint.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE CONTACT (CLEAR HOLES) |
D = CPR STYLE CONTACT (ALL TAP) |
E = CPR STYLE FLAT (CLEAR HOLES) |
F = CPR STYLE FLAT (ALL TAP) |
G = CPR STYLE GROOVED (CLEAR HOLES) |
H = CPR STLYE GROOVED (ALL TAP) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT TAP, CLEAR) |
K = CMR (ALL TAP) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP) |
N = UG COVER GROOVE (CLEAR HOLES) |
O = UG COVER GROOVE (ALL TAP) |
P = UG CHOKE (ALL TAP) |
Q = UG CHOKE (CLEAR HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY |
|
||
| WR SIZE | FREQ: GHZ | VSWR MAX |
|---|---|---|
| 28 | 26.5 - 40.0 | 1.1 |
| 42 | 18.0 - 26.5 | 1.15 |
| 51 | 15.0.-.22.0 | 1.15 |
| 62 | 12.4 - 18.0 | 1.1 |
| 75 | 10.0 - 15.0 | 1.1 |
| 90 | 8.20 - 12.4 | 1.1 |
| 112 | 7.05 - 10.0 | 1.1 |
| 113 | 5.85 - 8.20 | 1.1 |
| 159 | 4.90 - 7.05 | 1.1 |
| 187 | 3.95 - 5.85 | 1.1 |
| 229 | 3.30 - 4.90 | 1.1 |
| 284 | 2.60 - 3.95 | 1.1 |
| 430 | 1.70 - 2.60 | 1.1 |
SAMPLE P/N: AMC-PI-75-CO/CO-B
| MODEL N0: |
W/G SIZE |
FLANGE TYPE |
MATERIAL Brass/Alumn. |
|---|---|---|---|
| AMC-PI | 75 | -CO/CO- | B |
The above part number describes the following item: WR75 Pressure Inlet- with cover flanges on both sides, made of brass material.
Note: All AMC-PI models are made of brass or aluminum and include an iridite/corrosion protection treatment. Flanges are unplated, iridited and polished. For other plating finishes, material or paint color requirements,please specify.
