Waveguide Rotary Joints - U, L and IL
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Male or Female Connectors available
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
Advanced Microwave Components offers an array of waveguide rotary joints. AMC also offers special unit design upon customer request. All AMC components are produced with the highest quality available. We insure our quality through a three-point inspection system.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE CONTACT (CLEAR HOLES) |
D = CPR STYLE CONTACT (ALL TAP) |
E = CPR STYLE FLAT (CLEAR HOLES) |
F = CPR STYLE FLAT (ALL TAP) |
G = CPR STYLE GROOVED (CLEAR HOLES) |
H = CPR STLYE GROOVED (ALL TAP) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT TAP, CLEAR) |
K = CMR (ALL TAP) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP) |
N = UG COVER GROOVE (CLEAR HOLES) |
O = UG COVER GROOVE (ALL TAP) |
P = UG CHOKE (ALL TAP) |
Q = UG CHOKE (CLEAR HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY |
AMC FLANGE CODES:
CO= UG COVER STYLE
CH = UG CHOKE STYLE
CG= COVER WITH O-RING GROOVE
G = CPR STYLE WITH GROOVE
F = CPR STYLE NO GROOVE
O= OTHER (specify)
|
|||||
| EIA WR SIZE | FREQ: GHZ | DIM. "A" | DIM. "B" | FIG.TYPE | POWER WATTS (CW) |
|---|---|---|---|---|---|
| 75 | 14.0 - 14.5 | 1.57 | 2.25 | " l " | 600 |
| 75 | 14.0 - 14.5 | 3.5 | - | " 2 " | 2000 |
| 90 | 8.20 -12.4* | 4 | - | " 2 " | 1000 |
| 112 | 7.05 -10.0* | 4 | - | " 2 " | 1000 |
| 137 | 5.80 - 6.80 | 3.25 | 3 | " 1 " | 1000 |
| 137 | 5.85 - 6.42 | 5 | - | " 2 " | 1000 |
| 187 | 5.30 - 5.70 | 6.68 | - | " 2 " | 450 |
| 284 | 2.70 - 3.20 | 9.9 | - | " 2 " | 2500 |
| 430 | 1.75 - 2.30 | 12 | - | " 2 " | 3000 |
SAMPLE P/N:
AMC-RJ-IL-75-CH/CH-A
| MODEL N0: |
W/G SIZE |
FLANGE TYPE |
MATERIAL Brass /Alumn. |
|---|---|---|---|
| AMC-RJ-IL | 75 | -CH/CH- | A |
The above referenced part number describes the following: WR75 "In-Line" style rotary joint , with choke langes at both ends, made of aluminum.
Note: All AMC models include an iridite/corrosion protection treatment. Flanges are unplated, polished and iridited. Other finishes and paint colors are available upon request.
