Rigid Twists
- 1.70 - 22.00 GHz Performance Frequency
- 1.25 Typical Max VSWR (VSWR varies with design)
- Numerous Flange Configurations available
- Aluminum (6061) or Copper WR Waveguide Available
Advanced Microwave Components is proud to offer quality waveguide in a flash! Our waveguide twist sections are manufactured to our customer's specifications. All AMC components are produced with the highest quality available. We insure our quality with an ISO9001 / AS9100 Quality System. All parts are painted flat black and flanges are polished, unplated and iridited.
| WAVEGUIDE FLANGES: |
|---|
A = AMC QUICK DISCONNECT (MALE) PATENT PROTECTED |
B = AMC QUICK DISCONNECT (FEMALE) PATENT PROTECTED |
C = CPR STYLE GROOVED (ALL CLEAR HOLES) |
D = CPR STYLE GROOVED (ALL TAP HOLES) |
E = CPR STYLE FLAT (ALL TAP HOLES) |
F = CPR STYLE FLAT (CLEAR HOLES) |
G = CPR STYLE CONTACT (CLEAR HOLES) |
H = CPR STYLE CONTACT (ALL TAP HOLES) |
I = CMR (CLEAR HOLES) |
J = CMR (ALT/ TAP,/CLEAR HOLES) |
K = CMR (ALL TAP HOLES) |
L = UG COVER (CLEAR HOLES) |
M = UG COVER (ALL TAP HOLES) |
N = UG COVER GROOVED (ALL CLEAR HOLES) |
O = UG CHOKE (CLEAR HOLES) |
P = UG CHOKE (ALL TAP HOLES) |
Q = UG COVER GROOVED (ALL TAP HOLES) |
R = UBR |
S = PBR |
T = CBR |
U = UDR |
V = PDR |
W = CDR |
X = SPECIAL FLANGES (CUSTOMER TO SPECIFY) |
 |
|||
| EIA WR SIZE. | FREQ. RANCE GHZ | MIN. LENGTH DIM."L" | |
|---|---|---|---|
| 28 | 26.5 - 40.0 | 2 | |
| 34 | 18.0 - 26.5 | 2.25 | |
| 51 | 15.0 - 22.0 | 2.25 | |
| 62 | 12.4 - 18.0 | 2.5 | |
| 75 | 10.0 - 15.0 | 3 | |
| 90 | 8.20 - 12.4 | 3 | |
| 102 | 7.00 - 11.0 | 3.5 | |
| 112 | 7.05 - 10.0 | 3.5 | |
| 137 | 5.85 - 8.20 | 4 | |
| 159 | 4.90 - 7.05 | 5 | |
| 187 | 3.95 - 5.85 | 6 | |
| 229 | 3.30 - 4.90 | 7.5 | |
| 284 | 2.60 - 3.95 | 8.5 | |
| 430 | 1.70 - 2.60 | 16 | |
SAMPLE P/N:
AMCTW-45Y-75-N/N-12-B
| MODEL N0: |
ANGLE TW=90 Specify Angle |
DIRECTION Y=Clockwise Z=Counter-Clockwise |
W/G SIZE |
FLANGE TYPE |
LENGTH | MATERIAL B=Brass |
|---|---|---|---|---|---|---|
| AMCTW | 45 | Y | 75 | N/N | 12 | B |
The above referenced part number describes the following item: WR 75 45 degree CW, twist section, both flanges are cover flanges with grooves, made of brass material. The overall length is 12 inches from flange face to flange face.
Note: All AMC models include an iridite/corrosion protection treatment and are painted Flat black. Flanges are unplated, polished and iridited. AMC makes twists of all angles. Please specify your required degree if other than 90 degrees.
